Use this repeatable worksheet to estimate an evaporative air cooler’s electricity, water, and seasonal operating costs. Enter the wattage, operating hours, utility rates, pump use, and water consumption from your own unit rather than relying on a generic estimate.
Overview
An air cooler’s running cost usually has two parts: electricity for the fan and water used to wet the cooling media. Electricity is billed by the kilowatt-hour (kWh), while water is billed according to your local utility’s unit of measurement. Because models, settings, climates, and utility rates vary, there is no single answer to the question, “How much does an evaporative cooler cost to run?” A worksheet gives you a more useful answer for your room and schedule.
Evaporative coolers generally use less electricity than compressor-based air conditioning because they move air and operate a water pump rather than running a refrigeration compressor. That does not automatically make one the better choice in every home. Evaporative cooling works best when incoming air can be exchanged with outdoor air and humidity is relatively manageable. In a humid or closed room, cooling performance may be limited, and added moisture can become an indoor air-quality concern.
For a fair comparison, calculate the cooler’s operating cost first, then compare the result with your current cooling method. The portable AC versus evaporative air cooler cost comparison can help organize that second step.
How to estimate
Start with the information plate, owner’s manual, or product listing for five inputs:
- Fan power in watts
- Pump power in watts, if listed separately
- Hours of operation per day
- Your electricity rate per kWh
- Water use per hour or per day
If the label gives only one total wattage, use that figure. If it lists fan and pump wattage separately, calculate each component according to how it operates. The fan may run continuously while the pump cycles on and off, or you may use fan-only mode.
Electricity formula
Convert watts to kilowatts by dividing by 1,000:
Power in kW = watts ÷ 1,000
Then calculate energy use:
Daily kWh = power in kW × hours used per day
Finally, apply your electricity rate:
Daily electricity cost = daily kWh × electricity rate per kWh
For a monthly estimate, multiply the daily cost by the number of operating days in the month. For a seasonal estimate, multiply daily kWh by operating days in the season and then apply the rate. Use the rate shown on your bill or utility account, including any applicable delivery or supply charges that are calculated per kWh.
Pump and duty-cycle formula
If a pump does not run continuously, include its operating fraction. For example, a pump that runs for half of the cooling period has a duty cycle of 0.5:
Pump kWh per day = pump watts ÷ 1,000 × cooling hours × pump duty cycle
Add fan energy and pump energy to estimate total electricity consumption. If the manual does not provide a duty cycle, calculate a low and high case: one using fan-only operation and another assuming the pump runs during the entire cooling period. This produces a range rather than false precision.
Water formula
If the manufacturer provides water consumption in gallons per hour:
Daily water use = gallons per hour × hours in cooling mode
If the specification gives liters per hour, keep the calculation in liters or convert the result to your preferred unit. Some units recycle water through the pads, while others may use additional water for bleed-off, drainage, or cleaning. Use the complete figure in the manual when available. Do not estimate water use from tank capacity alone: a tank’s size tells you how often it may need refilling, not how much water the cooler consumes during operation.
Inputs and assumptions
Record your assumptions before calculating. A simple worksheet can look like this:
| Input | Your value | Where to find it |
|---|---|---|
| Fan wattage | _____ W | Label or manual |
| Pump wattage | _____ W | Manual or technical sheet |
| Hours per day | _____ hours | Your schedule |
| Operating days | _____ days | Month or season |
| Electricity rate | _____ per kWh | Utility bill |
| Water consumption | _____ gallons or liters per hour | Manual or measured use |
| Pump duty cycle | _____ | Manual or operating observation |
Separate cooling hours from fan-only hours. A cooler may use the fan for ventilation after the pump is switched off, changing both electricity and water totals. Also note whether you are calculating a typical day, a hot day, or a maximum-use day. A bedroom used overnight will have a different schedule from a living-room unit used for four afternoon hours.
Water cost may be small compared with electricity, but it still belongs in the worksheet. Find the water charge on your bill or contact the utility if the billing unit is unclear. If water is included in a fixed building charge, record the direct water cost as zero for your personal calculation, but still track consumption for refilling and conservation.
Placement and ventilation affect value, even when they do not change the appliance’s rated wattage. An open window, exhaust path, or cross-breeze may help remove humid air. Follow the room and ventilation guidance in how to improve airflow in a house. Clean pads and tanks according to the evaporative air cooler maintenance checklist; restricted airflow or buildup can make the same energy use feel less effective.
Worked examples
Bedroom example
Assume a bedroom cooler is rated at 80 watts for the fan and 20 watts for the pump. It runs for eight hours each night, with the pump operating for 75% of that time. Using an illustrative electricity rate of $0.20 per kWh—not a current universal price—the fan uses:
80 ÷ 1,000 × 8 = 0.64 kWh per night
The pump uses:
20 ÷ 1,000 × 8 × 0.75 = 0.12 kWh per night
Total electricity use is 0.76 kWh per night. At the illustrative rate, the electricity cost is:
0.76 × $0.20 = $0.152 per night
Rounded for readability, that is about 15 cents per night under these assumptions. Over 30 identical nights, the estimate is 22.8 kWh and $4.56. Add the water cost separately using the unit’s measured or published consumption.
Living-room example
Assume a 150-watt cooler runs for six hours each afternoon, with no separate pump figure available. Use the total rating as a conservative electricity input:
150 ÷ 1,000 × 6 = 0.90 kWh per day
At the same illustrative rate, the electricity estimate is $0.18 per day, or $5.40 over 30 days. If the unit’s total rating already includes a pump, do not add the pump again. If you later find separate component ratings, replace this estimate with the more precise calculation.
Garage or workshop example
Assume a 250-watt unit operates for five hours on 20 days during a season. Energy use is:
250 ÷ 1,000 × 5 × 20 = 25 kWh
At the illustrative rate, electricity cost is $5.00. This result describes appliance operation only. It does not measure the value of cooling, the effect of open doors, or whether the space is suitable for evaporative cooling. For sizing and room suitability, see how to choose the right evaporative cooler size.
When to recalculate
Revisit the worksheet whenever a key input changes. Recalculate at the start of each cooling season, after your electricity rate changes, or when you move the cooler to a different room. Run it again if you change from low to high speed, add overnight operation, use fan-only mode, or replace the unit with a model that has different wattage or water consumption.
Your actual bill is the best reality check. Compare a billing period with the cooler running against a similar period without it, while noting outdoor weather and other appliances that affect consumption. A smart plug or plug-in energy meter may help measure electricity for a compatible portable unit; use it according to the device instructions and never defeat electrical safety features.
For a practical monthly review, record four figures: operating days, average hours per day, total kWh attributed to the cooler, and water used. Then update the rate and repeat the calculation. If the cooler costs little to operate but does not provide acceptable comfort, compare the result with a portable air conditioner or another cooling option rather than extending its hours indefinitely. Also review ventilation, filter maintenance, and humidity concerns before increasing water use. The goal is not simply the lowest appliance cost; it is useful cooling with predictable energy, water, and indoor-air trade-offs.